BannerFans.com
Showing posts with label transmission. Show all posts
Showing posts with label transmission. Show all posts

Saturday, July 14, 2012

AUDI V8 TRANSMISSION FLUID

1990 Audi V8 Transmission Fluid related Issues.


  • HOW MUCH TRANS FLUID IS REQUIRED?
  • WHICH TRANS FLUID IS REQUIRED?
  • WHERE IS DIPSTICK FOR TRANSMISSION?
  • WHAT TO DO IF WRONG FLUID FILLED?


All basic issues are answered below.

It takes Approx 4 Quarts of  Transmission fluid.


The Audi trans fluid is full synthetic.
The additives in the synthetic fluid are necessary for correct power application and lubrication in the trans.

The trans needs fully synthetic ATF like Mobil 1 synthetic ATF or Wolf's Head brand full synthetic ATF.


The car does come with dipstick,but You can buy a service dipstick from the Audi dealer.They will provide you the dipstick to test the fluid level.

Please avoid using incorrect oil.First always confirm the oil/fluid you are using with the parts store.But if in case the wrong fluid is already been used then don't drive with the wrong fluid filled.It will damage the transmission and its assembly gears.

Jut get the fluid drained out.There is a drain plug from where wrong fluid can be drained. If the trans pan had a drain you can drain it the dump in 4 quarts of trans oil.
Pulling the trans pan off to drain it is difficult.But on some transmission pan there is no drain plug.Its only one plug that is fill plug. And if in your case there is no drain plug.

The only other option is to go to a mechanic that has an oil evacuation machine, This is a tool that goes down the fill pipe and sucks the oil out.So it will completely suck-up old fluid out and once its empty add 4 quarts of trans oil.


These details will help.
Thanks.


Users Who Viewed This Problem Also Viewed:

Transmission Fluid Refill?

http://whatisbyme.blogspot.in/2012/05/2003-toyota-prado-diesel-engine.html

Transmission Fluid Burnt Brown and not Shift to reverse?

http://whatisbyme.blogspot.in/2012/05/2003-lexus-rx300-transmission-fluid.html




Automatic transmission will not go into high gear?

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

Buick Park Avenue: Transmission will Not shift into drive?

http://schematicsdiagram.blogspot.com/2011/12/buick-park-avenuetransmission-will.html

No First gear Starts In Second Gear

http://www.howtorepairguide.com/2012/07/no-first-gear-starts-in-second-gear.html

Transmission-Hard To Down Shift

http://technoanswers.blogspot.in/2012/07/transmission-hard-to-down-shift.html





Friday, July 6, 2012

Gear indicator Shows "3" Instead Of "D"?

2006 Jeep Commander has Driving issues with Gear Shift Indicator Shows its in 3rd gear when its in Drive mode.
It will go to third gear and not other gears.

WHY GEAR INDICATOR SHOWS 3 AND WHY GEAR SHIFT ISSUES?

Its common issue.The vehicle is going in Limp mode.

In your case also the transmission is going and stuck up in Limp mode.
The problem is related to transmission and gear Shift solenoid issue.But there are many possibilities in that which can cause these problems.

The first step in diagnosing the problem will be to see what fault codes have stored.
Do you have a code reader or scan tool to check for fault codes?
Also not to worry if you dont have Scan tool.
Most parts stores like Autozone will read codes for free.

Once the codes are retrieved you can start your further troubleshooting as per Error codes.

THE ERROR CODES RETRIEVED ARE P0750 and P0700?


As i already told before that problem will be mostly related to Transmission or Solenoid pack.The Error code is indicating the same.

PLEASE GIVE ME MORE DETAILS ABOUT THIS BOTH OBD ERROR CODES?


In your jeep vehicle there is a Transmission Controlling module.Whenever there is a Error stored in the TCM( Trans control module.The Error code P0700 gets stored in the ECM( Engine control module).
This one is nothing to worry about and is just informational.
P0700 error code just tells you that there are some more error code stored in your TCM.In your case the other code is P0750.
These code is the one related to your actual problem.

P0750 is for the low/reverse solenoid in the solenoid pack inside the trans. This code sets when the voltage on the circuit is incorrect for a given state.

OK,WHAT ARE POSSIBILITIES THAT CAN CAUSE THIS INCORRECT VOLTAGE ISSUE?

There are few possibilities causing this.A  testing is required to confirm what is the actual cause.

  • The issue of  open circuit, short to power or ground on the low/reverse solenoid driver wire anywhere between the powertrain control module(PCM) and the trans.
  • Or a faulty powertrain control module(PCM) itself. A wiring problem or the module are certainly possible but not common.
  • It can be the connection issue at the large connector on the left side of the transmission, but again that's not common.Its noticed on some rare cases.Buy why to ignore that possibility too.

WHAT IS MOST COMMON CAUSE?

As per my experience and the cases which come at our garage center.In such cases the most possible problem is issue with solenoid pack.

In your case also,as per your problem description an your mentioned error code it seems like issue with solenoid.
By far the most common cause of a solenoid code is a failed solenoid, requiring solenoid pack replacement. 

WHERE IS SOLENOID PACK LOCATED ON JEEP COMMANDER?

On your model year jeep vehicle the solenoid pack is mounted to the top of the valve body in the transmission. The best thing to do if the problem is intermittent would be to do a visual inspection of the wiring, and if it's ok then replace the solenoid pack. It's not uncommon for a bad solenoid to set a fault code intermittently as the resistance of it's windings changes. 

OK,WHERE CAN I VIEW THE WIRING?

Before directly replacing the parts,its good to inspect the wiring.It can be loose or worn out/dirty or melted wiring.In that case rewiring the parts helps.
To take a look at the wiring slide underneath on the left side.Do it carefully in proper day time light if possible. Now on the left side of the trans near the front you'll see a very large black electrical connector that plugs in from the top down. This is the main connector and wiring that you have inspect and view. Make sure the wiring is visibly ok, also unplug the connector and have a look at the terminals this will give you full idea that wiring is either faulty or its proper.

HOW TO REPLACE SOLENOID PACK?
  • IS IT EASY TASK...CAN I DO IT MYSELF?
Its not very hard.But all depends upon your capability and your ability to do this task.If you have already done such parts replacement before then yes you can.But if as a newbie if you start this part replacing procedure then it will be naturally tough.Also it depends on what you have for tools and your comfort and ability level. 


For your information:----
To Replace the solenoid pack you need to drop the trans pan and drain the tranny  fluid.Also both filters need to be removed, and then dropping the valve body. 

If you are comfortable,i will mentioned the further procedure.From that you can decide whether to go into doing it yourself or getting it done by the mechanic.

Now once the valve body is out then the Torx screws that hold the solenoid pack to the valve body are removed and the pack is removed from the valve body. 

Approx time limit to complete this replacement is 2.0 hours of labor. If you are comfortable with an intermediate skill level repair and are willing to go into the trans then you can probably do it yourself. 
AS far as valve bodies go it's not a bad one to remove.

OK,CAN I DRIVE IT LIKE THAT FOR FEW MILES?

Yes its not the issue to drive in same condition for few miles or till you get it to your nearest mechanic.
In same condition driving it isn't going to hurt anything, but when it acts up you are only going to have third or third and fourth gear. You'll notice that it takes off sluggish accordingly and your cruising RPM's will be higher than normal.
But please get it repaired before you actually go for long drives or driving at highway speeds .Driving in that condition is not safe with this problem because you would have to limit your speed to keep engine RPM's down, if you drove normal highway speeds in third gear RPM's would be pretty high.And this can increase the problem.

Hope all goes well. Wish you best Luck.

This details will help.
Thanks.


Users Who Viewed This Problem Also Viewed:

1998 Toyota Camry: Gear Shift Illumination bulb is out?

http://technoanswers.blogspot.in/2012/04/1998-toyota-camry-gear-shift.html

2009 Lexus ES350: Shifter illumination bulb not Working?

http://technoanswers.blogspot.in/2012/04/2009-lexus-es350-shifter-illumination.html






For All types of Car models and brands help 
Go to Newly Launched

FREE Car repair guide? 
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html 

& 
Complete Car repair Help FREE? 
http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html



Thursday, June 28, 2012

Chrysler Cirrus Auto Transmission Swap?

Interchanging Automatic transmission 4 Plug unit with 2 plug unit.

Use new model transmission for old transmission.

The idea is good,but its not possible.


The older old model transmission used separate switches mounted to the front of the trans for reverse lights and park/neutral functions. Whereas on newer transmissions it uses transmission range sensor, which is wired to the transmission control module (TCM).
The range sensor has an elaborate array of switches and each one of them change state for a given gear.
The TCM has to see the correct combination of switch inputs for each gear, otherwise the trans will go into limp-in. Since the range sensor signals have nothing in common with the outputs of the switches on the old trans, installing the wrong trans and splicing wires isn't something that will work. The correct trans will need to be installed to work correctly.
If the actual transmission is not available at dealership then local car junkyard is the best place to start to get the same matching Transmission.

This details will help.
Thanks.


Users Who Viewed This Problem Also Viewed:

Dodge Automatic transmission will not go into reverse?

Dodge manual transmission will not go in reverse gear?

Transmission is making buzzing noise?

1998 Dodge Ram: Not Shift To Reverse?

http://schematicsdiagram.blogspot.in/2012/06/1998-dodge-ram-not-shift-to-reverse.html

Transmission leak on Toyota?

Location of transmission dip stick for 2003 Mercedes Benz C240?

1990 ford fiestiva transmission dipstick location?

Where is Transmission Dipstick located on 2001 Volvo c70?

1993 Ford Escort Transmission dipstick location?

Automatic transmission, with no reverse?


No Movement When Transmission is Shifted to Drive or Third?

1999 Honda Accord: Location of Transmission Dipstick?

http://technoanswers.blogspot.in/2012/06/1999-honda-accord-location-of.html



For All types of Car models and brands help 
Go to Newly Launched

FREE Car repair guide? 
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html 

& 
Complete Car repair Help FREE? 
http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html